|
Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!
|
| T O P I C R E V I E W |
| bpugh |
Posted - 09/30/2010 : 10:40:16 AM
I am asking this question on behalf of my wife who has a Brother KX-350 that does not have the transfer tools, the pusher, and the latch tool.
We ordered a 9mm set but they are too large. Does anyone know what size we should order for this model?
Thank you very much.
Brian.
Brian |
| 3 L A T E S T R E P L I E S (Newest First) |
| amoonsinger |
Posted - 11/01/2010 : 09:16:13 AM
Justina, I have gotten extra 7mm tools for my machines from Sunny Choi, Hong Kong Knitting, on ebay. They are much less expensive then some places. I have also found some in other ebay auctions and buy it nows at ebay.
For future reference. |
| justinaknits |
Posted - 10/08/2010 : 8:26:50 PM
Hi Brian, the Brother KX350 is a 7mm machine. As far as I know, it is the only 7mm machine made. It won't be quite as easy to find tools for it, but it is possible. Check with Peter Smith at http://www.sewknit.ca/ He is high, but he is the one most likely to have some.
Justina
http://justinaknits.com
http://groups.yahoo.com/group/Singer-Studio360-700knittingmachines/ |
| ValerieG |
Posted - 10/05/2010 : 05:56:19 AM
I can't think what the size if off hand but a Passap (roughly standard) machine is about 6mm. So.... 8?
Anyway the next size down, Most machines come in
bulky (that would be th 9mm)
Mid gauge
Standard
Fine
|
|
|
| Knitter's Review Forums |
© 2001-2013 Knitter's Review |
 |
|
|
|
